single Hung Windows - Little Elm Tx.

Window on a hillSingle Hung Windows

A window sash is a small frame that holds window glass inside of a larger window frame.  A window typically opens by sliding the window sash up or down inside the window frame.  There are typically two window sashes for each opening window.  The term “Single Hung” simply means that the window opens by raising the bottom sash only, while the top sash remains stationary. 

Benefits of Single Hung Windows
  • Window sashes that are stationary are usually more energy efficient than ones that move and rely on weather-stripping for their seal.
  • If a window sash does not move, there are fewer working parts that might eventually break down over time.  This could potentially decrease the instances of repair that might be necessary during the life of the window.
  • Single Hung Windows should be less expensive than Double Hung.  Building a Single Hung Window is not nearly as labor intensive as a comparable Double Hung Window.  Because there is less hardware to facilitate the operation of the upper sash, there is less cost to build the window and the overall price of the window should reflect this savings.  Unfortunately, this isn’t always true.  As fewer window manufacturers offer Single Hung Windows, the price of Double Hung is becoming more competitive.

 Disadvantages of Single Hung Windows
  • Depending upon the situation, cleaning the exterior of a window can be done more safely from the inside.  Single Hung windows must be cleaned from the outside.  Second story windows would require a ladder.  Some second story windows are completely inaccessible. 

Q&A

    Q:  Are Single Hung Windows more Energy Efficient than Double Hung Windows? 
    A:  They can be.  Double Hung Windows require more weather-stripping to seal the top (moveable) sash.  Weather-stripping is not as energy efficient as a permanently mounted sash.

    Q:  Are Single Hung Windows also “Tilt-In” Windows?
    A:  Only the moveable sash can be tilted.  The upper sash (or any stationary sash) does not tilt.

    Q:  Are Single Hung Windows less expensive the Double Hung Windows?
    A:  They can be.  This will depend on the manufacturer.

Quick Quote

Contact form submitted!
We will be in touch soon.
it's free

 

Daily Window Info

Efficient Window Collaborative

Heating Season Savings

 

In climates with a significant heating season, non-energy efficient windows can represent a major source of unwanted heat loss, discomfort, and condensation problems. In recent decades, windows have undergone a technological revolution. It is now possible to have lower heat loss, less air leakage, and warmer window surfaces that improve comfort and minimize condensation. The graphs below illustrate the simulated savings in heating season costs associated with energy efficient windows for a typical house in a heating-dominated climate. The savings shown do not include possible savings from reduced air leakage. Depending on the condition of the old windows in an existing home, the savings can be higher if window replacement leads to long-term air leakage reduction.

 

Quick Links

Chamber of Commerce

Adams Exteriors & Homesulate Insulation

Adams Exteriors LogoLocations

    Adams Exteriors

    3010 LBJ Freeway, 12th Floor

    Dallas Tx. 75234 USA

    (214)349-7283

    info@adamsexteriors.com

    Mon-Sat
    7am - 7pm

     

    Adams Exteriors - Ft Worth

    9500 Ray White, 22nd Floor

    Ft. Worth Tx. 76244 USA

    (817)898-0149

    terrant@adamsexteriors.com

    Mon-Sat
    7am - 7pm

     

    Adams Exterior - Plano

    1120 E.15th St. #3109

    Plano Tx. 75074 USA

    (469) 619-2607

    plano@adamsexteriors.com

    Mon-Sat
    7am - 7pm

Getting the ball rolling
1. Call or Quick window Quote
Cell Phone Icon

The best way to get started is to call or email our office or save time by filling out our "Quick Quote" form (right).

 

One of our representatives is waiting to help you with your project. We will ask about your specific situation and do everything that we can to help you with your project.

 

Even if you're not sure who to call or what kind of company might handle your work... if we can't help, we will do our best to point you in the right direction.

2. Window Estimates
Window Estimate Icon

Window Estimates are always scheduled at the customers convenience. They are detailed, prompt and always free of charge..

 

At Adams Exteriors we do our best to provide estimates that are valid for a long period of time throughout Dallas and Ft. Worth. We would like to offer every customer the opportunity to consider every option before making a commitment that they might later regret. We DO NOT pressure our potential customers the way that some others do. In return, we ask only for the opportunity to compete for your work.

3. Order, Manufacture & Delivery
Bargain Windows Icon

Once the estimate is accepted, the ordering and vinyl window manufacturing process could take two weeks or four weeks, depending upon the product (large windows, tempered glass).

 

Vinyl Windows often take 2 weeks to manufacture. However, Adams Exteriors is commited to the process of correctly ordering and scheduling the delivery of all matericals in a timely manner.

4. Installation & Inspection

Hammer and Nail IconIt is unusual for a window project to take longer than a day for installation. Adams Exteriors is proud to employ some of the best window installers in the area. Adams Exteriors - windows would like each of their customers to feel like their time is valued and schedule is respected.

 

The project is not finished until after a full inspection.

Tax Credits and Incentives