Double Hung Windows - Ft. Worth Tx.

Window on a hill Double Hung Windows

A window sash is a small frame that holds window glass inside of a larger window frame.  A window typically opens by sliding the window sash up or down inside the window frame.  There are typically two window sashes for each opening window.  The term “Double Hung” simply means that the window opens by raising the bottom sash up or pulling the top sash down, but each sash is moveable. 

Benefits of Double Hung Windows
  • Open during bad weather:  typically, you wouldn’t want your windows to be open while it’s raining but if you live in a single-story home, your overhangs probably block the rain from hitting the top 1/3rd of your windows.   Double Hung Windows allow you to open your windows from the top while the bottom is closed.
  • Pets:  If you open your windows, would your cat lie against the screen and push it out?  Would your cat “claw” your screen?  If your dog got too excited, would he simply run through the screen?  These problems are solved by opening your windows from the top.
  • Cleaning: Today, double hung windows are usually also “tilt in” windows.  This means that each sash not only slides up and down, but also tilts in toward the house so that the outside of the window is accessible for cleaning.  Once the window is clean, it can be tilted back into place.

 Disadvantages of Double Hung Windows
  • Potentially Less Efficient:  Moveable sashes are made efficient with weather-stripping.  Weather-stripping by definition is less energy efficient than permanently secured window sashes.  If a window is installed incorrectly and the window frame is allowed to bow outward, the weather-stripping might not maximize the potential efficiency of the window.

Quick Quote

Contact form submitted!
We will be in touch soon.
it's free

 

Efficient Vinyl Window Image
  • Vinyl Replacement Windows are specifically manufactured for energy efficiency.
  • Vinyl Frame is less conductive and resists heat transfer. Vinyl Windows also adjust to the natural movement of the typical North Texas home.
  • A reflective mixture, added to the glass, allows visible light to pass while resisting UV (heat).
  • Not only are there two panes of glass but each is very thick and divided by a large gap that is filled with dense gas.
more

Vinyl Quiet Window Image
  • The same things that make a window energy efficient also make it sound efficient.
  • Vinyl Window Frames conduct less sound than metal (aluminum / steel) window frames.
  • Because the window doesn't conduct as much heat, the seals never heat up to the point of failure that would allow sound to pass.
  • Thicker glass, along with Laminated Glass and dissimilar glass, available with replacement windows can drastically reduce sound transmittance.
more

Tilt-in Vinyl Window Image
  • Vinyl Replacement Windows tilt inward. Cleaning the outside glass from inside is easy. No more ladders.
  • Grids of Vinyl Replacement Windows are installed BETWEEN the two panes of glass. The result is an interior and exterior solid piece of glass with no grid edges to clean around.
  • Most vinyl replacement window sashes can be tilted inward allowing easy cleaning of the exterior glass from the inside of the home.
more

Daily Window Info

Efficient Window Collaborative

Heating Season Savings

 

In climates with a significant heating season, non-energy efficient windows can represent a major source of unwanted heat loss, discomfort, and condensation problems. In recent decades, windows have undergone a technological revolution. It is now possible to have lower heat loss, less air leakage, and warmer window surfaces that improve comfort and minimize condensation. The graphs below illustrate the simulated savings in heating season costs associated with energy efficient windows for a typical house in a heating-dominated climate. The savings shown do not include possible savings from reduced air leakage. Depending on the condition of the old windows in an existing home, the savings can be higher if window replacement leads to long-term air leakage reduction.

 

Quick Links

Chamber of Commerce

Adams Exteriors LogoLocations

    Adams Exteriors

    3010 LBJ Freeway, 12th Floor

    Dallas Tx. 75234 USA

    (214)349-7283

    info@adamsexteriors.com

    Mon-Sat
    7am - 7pm

     

    Adams Exteriors - Ft Worth

    9500 Ray White, 22nd Floor

    Ft. Worth Tx. 76244 USA

    (817)898-0149

    terrant@adamsexteriors.com

    Mon-Sat
    7am - 7pm

     

    Adams Exterior - Plano

    1120 E.15th St. #3109

    Plano Tx. 75074 USA

    (469) 619-2607

    plano@adamsexteriors.com

    Mon-Sat
    7am - 7pm

Getting the ball rolling
1. Call or Quick window Quote
Cell Phone Icon

The best way to get started is to call or email our office or save time by filling out our "Quick Quote" form (right).

 

One of our representatives is waiting to help you with your project. We will ask about your specific situation and do everything that we can to help you with your project.

 

Even if you're not sure who to call or what kind of company might handle your work... if we can't help, we will do our best to point you in the right direction.

2. Window Estimates
Window Estimate Icon

Window Estimates are always scheduled at the customers convenience. They are detailed, prompt and always free of charge..

 

At Adams Exteriors we do our best to provide estimates that are valid for a long period of time throughout Dallas and Ft. Worth. We would like to offer every customer the opportunity to consider every option before making a commitment that they might later regret. We DO NOT pressure our potential customers the way that some others do. In return, we ask only for the opportunity to compete for your work.

3. Order, Manufacture & Delivery
Bargain Windows Icon

Once the estimate is accepted, the ordering and vinyl window manufacturing process could take two weeks or four weeks, depending upon the product (large windows, tempered glass).

 

Vinyl Windows often take 2 weeks to manufacture. However, Adams Exteriors is commited to the process of correctly ordering and scheduling the delivery of all matericals in a timely manner.

4. Installation & Inspection

Hammer and Nail IconIt is unusual for a window project to take longer than a day for installation. Adams Exteriors is proud to employ some of the best window installers in the area. Adams Exteriors - windows would like each of their customers to feel like their time is valued and schedule is respected.

 

The project is not finished until after a full inspection.

Tax Credits and Incentives